Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 125)

125 Publication IASIMP-QS010B-EN-P - October 2009 125
Chapter
7
Optional - Configuration of the DeviceNet Network
This chapter describes some of the tasks required to set-up and configure a DeviceNet
network with your packaged controller.
The examples shown in this quick start use an example DeviceNet network configuration as
depicted in configuration Option 2, on
page 7 .
Before You Begin
•
Prepare the computer, see Chapter 2 .
•
Assemble and configure components of the DeviceNet network. This includes the
creation of a main DeviceNet configuration file in RSNetWorx for DeviceNet.
What You Need
• Power supply and tap for the DeviceNet network
(this example uses the 1606-XLDNET8 and a KwikLink power tap module)
• 1769-SDN DeviceNet scanner
• RSNetWorx for DeviceNet software
• DeviceNet Tag Generator utility (installed with RSLogix 5000 software)
IMPORTANT
This chapter does not provide complete details for the installation and
configuration of a DeviceNet network.
If you need additional information about configuring your DeviceNet network or
using other devices, such as the 1734-ADN adapter, with the packaged controllers,
see the
Additional Resources at the end of this chapter.