Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 140)

140 Publication IASIMP-QS010B-EN-P - October 2009
Chapter 7 Optional - Configuration of the DeviceNet Network
Create DeviceNet Tags
Recommended for any DeviceNet device
Complete these steps after you have configured your DeviceNet network and devices and are
ready to begin programming.
1. In RSLogix 5000 programming software, from
the Tools menu, choose DeviceNet Tag
Generator.
2. Select your RSLogix 5000 project.
3. Click Select Scanner.
4. Select the 1769-SDN scanner that
scans the network where the 1734
adapter is located.
5. Click Select RSNetWorx Project.
6. Select main DeviceNet configuration file
recorded on the Network Worksheet .
7. Click Select Scanner Node.
IMPORTANT Before running the DeviceNet Tag Generator, verify that RSNetWorx for DeviceNet software is closed.