Configure embedded i/o, Configure, Embedded i/o – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 58: Not required for quick start examples
Advertising
58
Publication IASIMP-QS010B-EN-P - October 2009
Chapter 3 Create a Project Using RSLogix 5000 Software
Configure Embedded I/O
Not required for quick start examples
The quick start examples use the default configuration of the embedded I/O. Before you use
the embedded I/O in your application, you may choose to configure the embedded I/O
specific to your application.
1. Double-click the embedded I/O you need
to configure.
2. Use the tabs and boxes within the
Module Properties dialog box to specify
your configuration parameters.
For detailed
information about
configuring your
embedded I/O, see
manual,
).
Advertising