Point i/o adapter, i/o modules, and power supply – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 70
Advertising
![background image](/manuals/581737/70/background.png)
70
Publication IASIMP-QS010B-EN-P - October 2009
Chapter 4 Add POINT I/O
Wire the Adapter and I/O Modules to the Power Supply
POINT I/O adapter, I/O modules, and power supply
Common
Power
1. Connect the 12/24V DC common
and 12/24V DC power wires from
the power supply to the adapter.
2. Refer to the individual POINT
I/O installation instructions for
wiring the I/O modules.
3. Turn on incoming power.
Advertising