Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 75
Advertising
Publication IASIMP-QS010B-EN-P - October 2009
75
Add POINT I/O Chapter 4
11. Enter a name.
12. Click OK.
10. Select the left-most
POINT I/O module
in your chassis and
click OK.
The module is added to the I/O
Configuration.
13. Repeat steps 9…12 until all of your
POINT I/O modules are added in
order from left to right.
After you have completed adding your
POINT I/O modules, go to Add Ladder
Logic on
Completed Configuration of POINT I/O Modules
Advertising