Create a project using rslogix 5000 software, Before you begin, What you need – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 53: Chapter 3, Create a project using, Rslogix 5000 software, Before you begin what you need
Advertising

53
Publication IASIMP-QS010B-EN-P - October 2009
53
Chapter
3
Create a Project Using RSLogix 5000 Software
In this chapter you create a project in RSLogix 5000 programming software. In the project
you use ladder logic to create a push button that controls a light on a digital output of the
controller. This project is used in subsequent chapters to test communication with other
devices.
For a programming quick reference and more information about programming your
CompactLogix packaged controller, see
of the user manual,
Before You Begin
•
Install the required software, see
.
•
Configure your network, see
What You Need
•
A CompactLogix packaged controller (1769-L23E-QB1B, 1769-L23-QBFC1B, or
1769-L23E-QBFC1B).
Advertising