Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 96)

96 Publication IASIMP-QS010B-EN-P - October 2009
Chapter 5 Add a PowerFlex 40 Drive
Additional Resources
Publications are available for viewing or electronic download at http://literature.rockwellautomation.com .
4. At the O.Start tag, enter 1.
The drive begins to run and the display
registers the drive’s speed until it reaches 55.5
Hz.
5. After the drive has reached 55.5 Hz,
enter 0 at the O.Start tag.
6. At the O.Stop tag, enter 1.
The drive begins to slow until reaching 0.0 Hz.
7. When the drive reaches 0.0 Hz, enter
0 at the O.Stop tag.
8. Go Offline.
By starting and stopping the drive, you verified that:
•
the controller is correctly communicating with the drive.
•
the drive can receive simple commands.
Resource Topic
Logix5000 Controllers Common Procedures Programming
Manual, publication
1756-PM001
Provides details about adding and configuring modules, establishing
communication, and writing ladder logic.
PowerFlex 40 Adjustable Frequency AC Drive User Manual,
publication
22B-UM001
Provides information about installing, programming, editing
parameters, and troubleshooting the PowerFlex 70 drive.