Set the ip address for the computer, Address, For the computer – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 40
Advertising
40
Publication IASIMP-QS010B-EN-P - October 2009
Chapter 2 Prepare the Computer, Network, and Controller
Set the IP Address for the Computer
Required for EtherNet/IP network (option1
)
1. On your desktop, right-click My
Network Places and choose
Properties.
2. Double-click the Local Area
Connection.
3. Click Properties.
4. On the General tab, select
Internet Protocol
(TCP/IP) and click
Properties.
5. Select Use the following
IP address and enter an IP
address and Subnet mask
for your computer.
6. Click OK.
For more information about selecting an IP Address, see the information on
7. Record the IP address and subnet mask in the
inside the back
cover.
8. Click OK.
Advertising