Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 83)

83 Publication IASIMP-QS010B-EN-P - October 2009 83
Chapter
5
Add a PowerFlex 40 Drive
In this chapter, you mount and wire power to a PowerFlex 40 drive, configure your
communication adapter, and make network connections. You then configure a PowerFlex 40
drive using the drive keypad and add the drive to your project using RSLogix 5000
programming software. This project builds upon the project created in
Chapter 3 .
Before You Begin
• Create a project using RSLogix 5000 programming software, see Chapter 3 .
What You Need
• PowerFlex 40 drive
•
Communication adapter for use with the PowerFlex 40 drive (22-COMM-E,
EtherNet/IP adapter)
• Communication adapter cover for use with the PowerFlex 40 drive
• No additional software required