Connect the communication adapter, Connect the, Communication – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 86: Adapter
Advertising
86
Publication IASIMP-QS010B-EN-P - October 2009
Chapter 5 Add a PowerFlex 40 Drive
Connect the Communication Adapter
1. Record the Ethernet address (MAC ID) of the
Ethernet adapter on the
.
The Ethernet address is found on the label on
the back of the Ethernet adapter.
1. Attach the extending screws.
0.8…1 Nm
(7…9 lb-in)
Allen-Bradley
2 2 - C O M M - E
SERIES A
FRN: V1.003
SN: 40018FB6
DEVICE: 5vDC 350mA
HW ADDRESS: 00:00:BC:08:85:B6
Ethernet Adapter Label
2. Snap the adapter into the cover and connect
the cable from the adapter to the PowerFlex
40 drive.
Advertising