Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 127)

Publication IASIMP-QS010B-EN-P - October 2009 127
Optional - Configuration of the DeviceNet Network Chapter 7
Attach the 1769-SDN Module to the Packaged Controller
Unlocked
Locked
1. On the top of the 1769-SDN module, verify that
the locking tab is unlocked.
2. Use the tongue-and-groove slots to slide the
1769-SDN onto the end of the controller.
3. Lock the locking tabs.
4. Record the series letter from the 1769-SDN
module label on the Network Worksheet inside
the back cover of this quick start.
5. Lock the locking tab on the top of the
1769-SDN module.
6. Slide the end cap terminator on and lock the
locking tab.
7. Press the assembled system onto a DIN rail.
IMPORTANT
This quick start uses only the 1769-SDN module as
an expansion module.
Packaged controllers support one communication
module or two I/O modules for expansion.
See Chapter 4 of the user manual, Add Additional
Local I/O (on page 229 ) for more information about
the number of expansion modules that can be used
with your packaged controller.