Configure the, Ethernet/ip driver, In rslinx software – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 44: Required for ethernet/ip network (option 1)
Advertising
44
Publication IASIMP-QS010B-EN-P - October 2009
Chapter 2 Prepare the Computer, Network, and Controller
Configure the EtherNet/IP Driver in RSLinx Software
Required for EtherNet/IP network (option 1)
1. If RSLinx software is not open, launch RSLinx software.
2. From the Communications
menu, choose Configure
Drivers.
3. From the Available
Driver Types, choose
Ethernet/IP Driver.
4. Click Add New.
5. Click OK to keep the
default name.
6. Click OK to Browse Local
Subnet.
Advertising