Analog i/o tags – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual

Page 205

Advertising
background image

Publication IASIMP-QS010B-EN-P - October 2009

205

Embedded I/O Chapter 3

Analog I/O Tags

As indicated in the

Embedded I/O Tags

section on

page 192

, the tags for the

embedded I/O are located in the Controller Tags folder at the creation of the
packaged controller project.

Tags specific to the use of the analog I/O are described here.

Analog I/O Tags

(1)

(1)

See the Analog I/O Tag descriptions on following page for further explanation of these tags.

Configuration Tags
(Analog I/O configuration is completed via
the Module Properties dialog box.)

Input Data and Status Tags

Output Data

Advertising