Add ladder logic – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 76
Advertising
76
Publication IASIMP-QS010B-EN-P - October 2009
Chapter 4 Add POINT I/O
Add Ladder Logic
1. In the Main Routine, drag and drop a Branch onto the rung.
2. Expand the branch to the right side of Output _Light.
3. Drag and drop another Output Energize element
onto the Branch and name it xxxx_Light
(where xxxx identifies your output module).
Advertising