Test the application, On the panelview, Plus terminal – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 123: Step 5, Step 1, All controllers
Advertising
Publication IASIMP-QS010B-EN-P - October 2009
123
Add a PanelView Plus 600 Terminal Chapter 6
Test the Application on the PanelView Plus Terminal
All controllers
1. On the PanelView Plus, press Load
Application [F1].
2. Select your .mer file and
press Run Application
[F2].
3. Press Yes [F7].
4. After the application loads, press
Run Application [F2].
5. Press the Push Button. Verify that the indicator turns on and that the light on the
Compact digital output module turns on.
6. Press the Push Button again and verify that the indicator and light turn off.
Advertising