Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 61)

Publication IASIMP-QS010B-EN-P - October 2009 61
Create a Project Using RSLogix 5000 Software Chapter 3
9. Right-click the Output_Light tag name and
choose New ‘Output_Light’.
Output_Light is an alias tag for the I/O point
tag name. This lets you assign a simple name to
a physical I/O point address.
10. From the Type pull-down menu,
select Alias.
11. In the Alias For pull-down menu,
browse to a local output point and
select any bit.
In this example, Local:2:O.Data.0 is
used.
12. Click OK.
The output shows the specified
output.
8. Name the Output Energize Output_Light.
IMPORTANT
Do not use spaces in the tag name. Use
underscores ( _ ) instead.