Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 134)

134 Publication IASIMP-QS010B-EN-P - October 2009
Chapter 7 Optional - Configuration of the DeviceNet Network
10. Verify that the I/O parameters
match those verified at step 3 .
If these parameters do not match those at
step 3 , check your adapter and output
module configurations.
Depending on the POINT output
module you use, these parameters may be
different than those shown here.
11. Click OK.
12. Verify that Automap on Add is
checked and click Apply.
13. Click Yes.
14. Save the configuration file.
15. Close RSNetworx for DeviceNet software.