Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 85)

Publication IASIMP-QS010B-EN-P - October 2009 85
Add a PowerFlex 40 Drive Chapter 5
Mount the PowerFlex 40 Drive
For this quick start, the PowerFlex 40 drive is simply placed on a desktop.
For complete mounting instructions, see the PowerFlex 40 Drive User Manual, publication
22B-UM001 .
Wire Power
1. Remove the cover.
V/T2 T/L3 S/L2 R/L1 U/T1 W/T3
BR+ BR- DC- DC+
2. Remove the terminal block cover to
access the power connections.
3. Insert the 120/240V AC, V AC COM
and chassis ground wires and tighten
the terminal screws.
Connect To
120/240V AC R/L1
V AC COM S/L2
Chassis ground
WARNING
Verify that all incoming power
is turned off before wiring
power.