Create a push button, Create a push, Button – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 113: All controllers
Advertising
Publication IASIMP-QS010B-EN-P - October 2009
113
Add a PanelView Plus 600 Terminal Chapter 6
Create a Push Button
All controllers
1. From the Objects menu, choose
Push Button
>
Maintained.
2. Click and drag to create the push
button beneath the indicator.
3. Right-click the push button you
just created and choose
Properties.
4. On the States tab, verify
that State0 is selected.
5. In the Caption, type Push
to turn light ON.
6. Select State1.
7. In the Caption, type Push to
turn light OFF.
Advertising