Communicate with df1 devices – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 169
Advertising
Publication IASIMP-QS010B-EN-P - October 2009
169
Network Communication Chapter 2
Communicate with DF1 Devices
You can configure the controller as a master or slave on a serial
communication network. Use a serial network when:
•
the system contains three or more stations.
•
communication occurs regularly and require leased-line, radio, or
power-line modems.
DF1 Configuration Procedure
Configure the controller for DF1 communication by performing this
procedure is RSLogix 5000 software.
1. In your I/O Configuration tree, right-click your controller and choose
Properties.
The Controller Properties dialog box displays.
CompactLogix L23
Modem
Modem
Modem
RS-232
RS-232
RS-232
EtherNet/IP
RS-232
1769-L23E
1769-L23
Advertising