Test the indicator and push button, Test the indicator, And push button – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 115: All controllers
Advertising
![background image](/manuals/581737/115/background.png)
Publication IASIMP-QS010B-EN-P - October 2009
115
Add a PanelView Plus 600 Terminal Chapter 6
Test the Indicator and Push Button
All controllers
1. Verify that the keyswitch on your
controller is moved to Run.
2. Right-click an unused area of the
display and select Display
Settings.
3. Change the Maximum Tag
Update Rate to 0.05.
4. Click OK and then click OK
again.
5. Click the Play button.
Advertising