Connect the battery to the packaged controller, Record the ethernet address (mac), Connect the battery – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual

Page 25: To the packaged, Controller, Record the, Ethernet address, Mac)

Advertising
background image

Publication IASIMP-QS010B-EN-P - October 2009

25

Assemble the CompactLogix Hardware Chapter 1

Connect the Battery to the Packaged Controller

Battery

Record the Ethernet Address (MAC)

1769-L23E controllers

The Ethernet address (MAC) is found on a label near the power-supply wiring terminal. This
is an example address.

Record the Ethernet address (MAC) for the CompactLogix controller on the

Network Worksheet

at the back of this quick start. This address may be used to set the IP

address later.

1. Remove the battery door and

connect the battery to the
controller.

2. Insert the battery into the slot

on the battery door.

3. Close the battery door.

00:00:BC:21:D7:BE

Ethernet Address

Advertising