Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 16)

16 Publication IASIMP-QS010B-EN-P - October 2009
5
Required Software Your software requirements depend upon the CompactLogix system
components you are using. Use the sections below to determine the software
required for your system components.
CompactLogix Packaged Controller Software Requirements
To complete any of the examples in this quick start, you need one of these
editions of RSLogix 5000 programming software, version 17 or later:
• Lite
• Mini
• Full
• Standard
• Professional
You install and use these utilities included with the RSLogix 5000
programming software to complete the examples in this quick start:
• BootP-DHCP server
• ControlFlash
• RSLinx Classic, version 2.54 or later
Verify that these utilities are included with your RSLogix 5000 software
package.
POINT I/O Modules and PowerFlex 40 Drive Software
Requirements
If you are using POINT I/O modules or a PowerFlex 40 drive to complete
examples in this quick start, only the software listed for the CompactLogix
packaged controllers is required.
PanelView Plus Terminal Software Requirements
If you plan to complete the PanelView Plus examples within this quick start,
FactoryTalkView Machine Edition software is required in addition to the
software required for the use of the packaged controller.