Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 131)

Publication IASIMP-QS010B-EN-P - October 2009 131
Optional - Configuration of the DeviceNet Network Chapter 7
9. Record the node address on the
Network Worksheet .
10. Click Close.
7. If you receive a linking device
warning, click Yes.
The Node Commissioning
dialog box is populated with
the 1769-SDN module’s
current settings.
8. Select an available node
Address for the 1769-SDN
module and click Apply.
This example uses node
address 1.
The node address is applied
and a confirmation is given
in the Messages box.
TIP
If you receive an
communication error, verify
that the scanner is not
running.
To determine if the scanner
is running, examine the
commandregister.run tag in
RSLogix 5000 programming
software and verify it is at
0.