Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 19)

Publication IASIMP-QS010B-EN-P - October 2009 19
5
DeviceNet Configuration
1 1769-SDN Compact I/O DeviceNet Scanner
1
1734-ADNX
(4) POINT I/O DeviceNet Adapter
1 22-COMM-D DeviceNet Adapter for Use with the PowerFlex 40 Drive
1 1606-XLDNET8 DeviceNet Power Supply
N/A 1485C-P1E75 KwikLink Flat Cable
2 1485A-T1E4 KwikLink Terminator/Resistor
4 1485P-P1E4-R5 KwikLink Sealed Micro Connector
4 1485K-P1F5-C KwikLink Right-angle Male to Cable
1 1485T-P1E4-B1 KwikLink Power Tap Module
(1) Use POINT I/O modules at series C or later to complete examples in this quick start.
(2)
The 1734-OB4E module is the only POINT I/O module used in this quick start. The other modules are added only as examples and are not required.
(3) The number of wiring bases you need depends upon the number of POINT I/O modules you use in your system.
(4) The examples in this quick start use the 1734-ADNX POINT I/O adapter. However, you may choose to use the 1734-ADN adapter instead.
(5) For more information about industrial grade cables, see the Ethernet Connectivity product profile, publication 1585-PP001 .
Hardware Used in This Quick Start

Quantity Cat. No. Description