Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual - Manual (Page 122)

122 Publication IASIMP-QS010B-EN-P - October 2009
Chapter 6 Add a PanelView Plus 600 Terminal
6. Verify that the Replace communications checkbox is checked and verify that your
PanelView Plus is selected for the destination terminal.
7. Click Download.
8. Click OK.
After the download is complete, your PanelView Plus terminal may restart. After the restart,
the application file you specified is loaded.
• If your application has been loaded onto the PanelView Plus terminal, skip to step 5 of
Test the Application on the PanelView Plus Terminal , on page 123 .
•
If the PanelView Plus terminal does not restart and load the application file, then skip
to
step 1 of Test the Application on the PanelView Plus Terminal , on page 123 .
Check
Select.