KEYENCE Visual KV Series - Manual (Page 117)

3.4 Device Mode
Chapter 3 Access Window
1-93
1
3
Visual KV
Series
Trimmer (TRM)
• While the device No. is selected, no turbo function is available.
• In the numeric value change status, a flashing digit is changed in the same way
as T/C. However, when the upper limit value is changed, numeric values stored
in DM1938 (for the trimmer No. 0) and DM1939 (for the trimmer No. 1) are also
automatically changed.
• If an entered upper limit value is smaller than the current value, the current value
is forcibly overwritten to the upper value.
• If an entered current value is larger than the upper limit value, the current value
change is canceled.
Relay (RLY)
• While the device No. is selected, three types of turbo functions (quick, turbo and
super turbo) are available.
• In the status change status, ON or OFF can be selected at the right end in the
middle line.
Note: On/off status can be changed or registered by pressing key for 3 seconds.
(Except for input relays)
CTC2 CTC3
The CTH1 value is displayed in the
middle line for both CTC2 and CTC3.
Device No.: 0 or 1
Current value
Upper limit value
Device No.: 0 to 17915
ON/OFF indication
KVHKA Chap 03.p65 08.3.11, 11:12 AM 93