Kv -300 – KEYENCE Visual KV Series User Manual
Page 364
9.2 Configuration
KV-10/80 Series Only
KV
-300
KV-10/80
Chapter 9 KV-AD4/DA4 Analog I/O Unit
1-340
9
Analog output terminal assignment
Terminal
Signal
Description
• Output range: -10 to +10 V
NC (No connection)
Analog voltage output ch0
Analog voltage output ch1
Analog voltage output ch2
Analog voltage output ch3
Analog current output ch0
Analog current output ch2
Analog current output ch1
Analog current output ch3
I0
I1
I2
I3
C0
C1
C2
C3
C4
C5
C6
C7
•
V0
V1
V2
V3
• Output range: 4 to +20 mA
Ground for analog signal (connected internally)
Note 1: Separate terminals are used for analog voltage input and analog current
output. Take care not to miswire these terminals.
Note 2: Do not connect the output voltage and output current to terminals of the
same No., for example, by connecting external instruments to both V0 and I0.
Doing so might cause the KV-DA4 to malfunction.
Dimensions
C0
C1
C2
C3
C4
C5
C6
C7
V0
V1
V2
V3
I0
I1
I2
I3
ANALOG OUT
KEYENCE
KV - DA4
POWER
2-ø5 (mounting hole)
99
31
65
39
43
35.4
90
111
KVHKA Chap 09.p65
08.3.11, 11:20 AM
340