Offline editor start (offline editor) [fnc67, Offline editor stop (quit off-l edit) [fnc68, Offline editor start – KEYENCE Visual KV Series User Manual

Page 245: Offline editor) [fnc67, Offline editor stop, Quit off-l edit) [fnc68

Advertising
background image

6.3 Functions

Chapter 6 Handheld Programmer

1-221

1

6

OFFLINE EDITOR START

RUN mode

(OFFLINE EDITOR) [FNC67]

Function

Edits program using handheld programmer while KV is in operation.

The program can be edited by following the same procedure as in the PRO-
GRAM mode. (The accessible functions, however, are restricted.)

This function is used to edit the program for the memory card while the KV is in
use. Accordingly, when OFFLINE EDITOR is quitted [FNC68], the program is not
written into the KV, but the program in the KV is read onto the programmer.

When stopping the operation of the KV while OFFLINE EDITOR is in use, change
the mode switch to PROGRAM. You can enter the PROGRAM mode without
clearing the program on the handheld programmer.

Note: To write the edited program into the KV, use the PROGRAM SENT OR
RECEIVED function [FNC66] and then quit the OFFLINE EDITOR function. In this
case, the KV stops the operation to write the new program, and then starts the
operation from the top of the program. Note that the timer values will be reset.

Key operation

Basic operation

Example of operation

OFFLINE EDITOR STOP

OFFLINE EDITOR

(QUIT OFF-L EDIT) [FNC68]

Function

Quits OFFLINE EDITOR.
When quitting the OFFLINE EDITOR function, the program is automatically verified
with that in the KV PLC. If two programs do not match, the program in the PLC is
read onto the programmer. If changes have already been made on the program in
the PLC, this program is automatically read onto the programmer.

Key operation

Basic operation

Example of operation

ORB

6

LD

7

ENT
R-SRCH

FNC

Key operation

Display

Description

RUN

Initial display (RUN mode)

FNC[67]

Access OFFLINE EDITOR START

OFFLINE EDITOR

[OFFLINE EDITOR] function.

00000

Line 0 is displayed.

LD 00000

FNC

ENT

R-SRCH

Key operation

Display

Description

00000

Display arbitrary line.

LD 00000

READ/LOAD OK

When program differs from that in

PUSH CLR TO CONT

KV PLC the latter is read.

RUN

Return to initial display of RUN
mode.

FNC

ENT

R-SRCH

ORB

6

CLEAR

ORB

6

AND

8

ENT
R-SRCH

FNC

AND

8

KVHKA Chap 06_3&4&5.p65

08.3.11, 11:17 AM

221

Advertising