KEYENCE Visual KV Series - Manual (Page 256)

6.4 Memory Card
Chapter 6 Handheld Programmer
1-232
6
CLEAR PROGRAM mode or OFFLINE EDITOR
Function
Initializes the memory card.
•
Be sure to initialize every new card before using it.
• Use this function to clear all programs in the card.
Example 1: Initializing the new memory card M-2 (32 kbytes)
(*) Press [ENT/R-SRCH] instead of [CLEAR] to continue initializing.
Example 2: Initializing the memory card M-3 (128 kbytes) with programs
stored
(*) Press [ENT/R-SRCH] instead of [CLEAR] to continue initializing.
Be sure to select the correct storage capacity for the M-2 and M-3 as follows:
M-2: 32 kbytes
M-3: 128 kbytes
Key operation Display Description
00000
Display arbitrary line in program.
LD 00000
NEWCARD
A prompt appears for confirmation.
INITIALIZE OK?
32 KBYTES CARD
Select memory capacity.
INITIALIZE?
FREE: 24PROGRAM
Available storage capacity is displayed.
125 BLOCK
00000
Return to initial display.
LD 00000
ENT
R-SRCH
MON
CARD
CLEAR
ENT
R-SRCH
Key operation Display Description
00000
Display arbitrary line in program.
LD 00000
FREE: 44 PROGRAM
Available storage capacity is displayed.
486 BLOCK
CARD NEW
Available functions are displayed.
->ACCS CLEAR
CARD NEW
Select "CLEAR".
ACCS ->CLEAR
32 KBYTES CARD
INITIALIZE?
128 KBYTES CARD
Select storage capacity.
INITIALIZE?
FREE: 48 PROGRAM
Memory card is initialized.
506 BLOCK
00000
Return to initial display.
LD 00000
ENT
R-SRCH
MON
CARD
CLEAR
ENT
R-SRCH
ENT
R-SRCH
ON OFF OFF
ON OFF
(*)
(*)
CAUTION
KVHKA Chap 06_3&4&5.p65 08.3.11, 11:17 AM 232