KEYENCE Visual KV Series - Manual (Page 226)

6.2 Basic Operations
Chapter 6 Handheld Programmer
1-202
6
MOVE CURSOR
Pressing [ ➞] allows the blinking cursor to move to the desired position. (The cursor
moves sequentially to the instruction position, operand position, and line No.
position.)
• Functions when the PROGRAM mode, the ON/OFF MONITOR mode, or
OFFLINE EDITOR [FNC67] is in use.
Operation
SCROLL
Scrolls to the previous line, the next line, or to an arbitrary line.
■ Scrolling to the previous or following line
•
Functions when the PROGRAM mode, the MULTI-MONITOR mode, the ON/OFF
MONITOR mode, or OFFLINE EDITOR [FNC67] is in use.
• Holding the key down allows the line to be successively moved.
Operation
ON
. . . Displays the previous line.
OFF
. . . Displays the next line.
■ Scrolling to an arbitrary line
•
Functions when the PROGRAM mode, the ON/OFF MONITOR mode, or
OFFLINE EDITOR [FNC67] is in use.
• When the line No. is set to 99999, the final line is displayed.
• Move the cursor to the line No. position first.
Operation
Example: To scroll from line 0 to line 10:
• Numeric keys serve also as instruction keys. When line No. is set, however,
numeric keys automatically serve as numeric keys.
• High order zero(s) does not need to be entered.
0 0 0 0 0
L D 0 0 0 0 0
Operation
Instruction
0 0 0 0 0
L D 0 0 0 0 0
Operand
0 0 0 0 0
L D 0 0 0 0 0
Cursor
(blinking)
Cursor
(blinking) Cursor
(blinking)
Line No.
0 0 0 0 0
L D 0 0 0 0 0
Cursor (blinking)
0 0 0 1 0
O U T 0 0 5 0 0
Cursor (blinking)
SET
1
RES
0
ENT
R-SRCH
KVHKA Chap 06_1&2.p65 08.3.11, 11:16 AM 202