Kv -300 – KEYENCE Visual KV Series User Manual

Page 302

Advertising
background image

7.6 Display Interface Mode Programming

KV-300 Series Only

KV

-300

KV-10/80

Chapter 7 KV-L2 Serial Interface Module

1-278

7

Command format

Response format (When the command is executed normally, the response

includes the end code "00".)

Note 1: The values of the temporary memory address (TM) and analog trimmer
cannot be read with a same single command at once. Read each value separately.

Note 2: The station no. is indicated in decimal; the end code, in hexadecimal.

Read current value of counter/timer/high-speed counter (RC)

This command reads the current value of the counter/timer/high-speed counter
starting from the specified no. within the specified range.

Command format

Response format (When the command is executed normally, the response

includes the end code "00".)

Note 1: The values of the counter/timer and high-speed counter cannot be read with
a same single command at once. Read the counter/timer and high-speed counter
values individually.

Note 2: The station no. is indicated in decimal; the end code, in hexadecimal.

Read start No.

Data to read

0000 to 0031

TM00 to TM31

0032

Trimmer value 0

0033

Trimmer value 1

Station no.

nn

@

RC

FCS

C

R

Read start

no.

nnnn

Number of

counters/timers

to read

nnnn

Header

code

00 to 15

(in decimal)

Terminator

0001 to
0250/0001 to
0002 (in
decimal)

0000 to
0249/0254 to
0255 (in
decimal)

Read start No.

Data to read

0000 to 0249

Counter/timer

0254

High-speed counter CTH0

0255

High-speed counter CTH1

Station no.

nn

@

RC

FCS

C

R

End code

nn

Data

nnnn

Data
nnnn

Header code

Terminator

Data of read start no. +1
(in decimal)

Data of read start no.
(in decimal)

@

RH

FCS

C

R

Station no.

nn

Read start no.

nnnn

Number of
memories/

timers to read

nnnn

Header

code

00 to 15

(in decimal)

Terminator

0001 to 0032/
0001 to 0002
(in decimal)

0000 to 0031/
0032 to 0033
(in decimal)

@

RH

FCS

C

R

Station no.

nn

End code

nn

Data
nnnn

Data
nnnn

Header

code

Terminator

Data of read start no. +1
(in hexadecimal)

Data of read start no. (in
hexadecimal)

KVHKA Chap 07_5to10.p65

08.3.11, 11:18 AM

278

Advertising