KEYENCE Visual KV Series User Manual
Page 431
Appedix C. Ladder Program List
Visual KV Series only
Appendicies
Appendices
1-407
Total count
3-152
Comparison of absolute values
3-154
Multiplying the counter current value by DM value
3-156
Total count average
3-158
Fetch input data separately
3-160
Output of BCD 2-digit data
3-162
Separate input of 2-digit BCD
3-163
Judgement of matching data
3-165
Fetching four-digit data of BCD digital switch (inputs 0004 through 0011
3-168
for low-order 2 digits and 0100 through 0107 for high-order 2 digits) to
transfer them as counter setting value
Separate input of BCD
3-168
Error input count
3-170
UP/DOWN count
3-173
Total count 1
3-174
Total count 2
3-174
Output of error input No. in BCD
3-178
Display of 7-segment LED
3-178
Output of 4-digit BCD data
3-181
Output of 8-digit BCD data
3-182
Input of 4-digit BCD data
3-182
Interrupt with a signal converter
3-198
Interrupt with a high-speed counter
3-199
Measuring the ON time of high-speed pulses
3-200
Measuring the period in which a target passes between two points
3-201
Comparing encoder values
3-217
24-bit high-speed counter (single-phase input)
3-224
Ring counter: When using a 16-bit high-speed counter
3-226
Ring counter: When using a 24-bit high-speed counter
3-227
Program using a digital trimmer
3-229
Program for speed control
3-230
Program for basic operation of the frequency counter
3-232
Program for synchronous control
3-232
Cam switch
3-236
To output a clock pulse of 1 ms (1 kHz)-period from output relay 0500
3-242
To output a clock pulse of 1 ms (1 kHz)-period from output relay 0501
3-243
To output a clock pulse of 500 µs (2 kHz)-period and 200 µs-width
3-245
from output relay 0500
To output a clock pulse of 500 µs (2 kHz)-period and 200 µs-width from
3-247
output relay 0501
Direct clock pulse output: Stopping the pulse output at a specified pulse
3-249
count
Direct clock pulse output: Ramp-up/down control
3-251
Ladder example of ramp-up/down control
3-259
Ladder example of the jog operation
3-260
Ladder example of automatic operation (palletizing operation)
3-261
Ladder example of a return to the zero point
3-262
Ladder example of an automatic operation (continuous operation
3-263
with wait status)
Ladder example of a pulse motor application circuit
3-264
KVHKA Appendix.p65
08.3.11, 11:05 AM
407