KEYENCE Visual KV Series - Manual (Page 225)

6.2 Basic Operations
Chapter 6 Handheld Programmer
1-201
1 6
Mode: P: PROGRAM mode
R: RUN mode (OFFLINE EDITOR not used)
E: OFFLINE EDITOR [FNC67]
To find function No. assigned to desired function: Press [FNC], and the cursor then
appears at the position where the function No. is to be entered. Pressing
ON
or
OFF
scrolls the functions and assigned Nos., making it easy to find the desired
function No.
BS key
When the line No., relay No., timer No., or counter No. is entered using the numeric
key, pressing BS key each time deletes lowest digit.
CLEAR
Pressing [CLEAR] allows the input data to be canceled or error message to be
deleted.
Press CLEAR:
•
To cancel an instruction or operand erroneously entered during the programming
and to return to the previous display. Pressing [CLEAR] deletes displayed data,
but does not delete instructions/operands that have already been stored.
• To delete error message. If cause of error is removed, operation can be re-
sumed.
• To cancel the entry of [FNC], [INS], [DEL], [SEARCH], or [CARD/MON].
Operation
0 1 2 3 4
BS
0 0 1 2 3 0 0 0 1 2
BS
CLEAR
MON
CARD RUN
TIME
SCAN
MON
CARD
MONITOR
MULTI
MON
CARD
MON
CARD
MONITOR
ON/OFF
For creating program
Operation Function Mode Key operation
Reference
page
1. DISPLAY LINE PE See "SCROLL" on previous page. 1-202
2. CHANGE PE Follow same procedure as described in "ENTER 1-203
INSTRUCTION INSTRUCTION" on the previous page. New
instruction is overwritten on previous instruction.
3. CHANGE PE Follow same procedure as described in "ENTER 1-203
OPERAND OPERAND" on previous page. New operand is
overwritten on previous instruction.
INSERT LINE PE 1. Follow procedure described in "SCROLL" to 1-206
scroll to desired line.(To insert new line
between lines 2 and 3, scroll to line 3.)
2. Press INS to enter INSERT mode. ("INSERT"
is displayed.)
3. Enter desired instruction and operand.
*Press CLEAR to cancel INSERT mode.
DELETE LINE PE 1. Follow procedure described in "SCROLL" to 1-206
scroll to desired line.
2. Press DEL to enter DELETE mode and press
ENT
R-SRCH
("DELETE" is displayed.)
Press CLEAR to cancel DELETE mode.
MONITOR R 1-212
Displays line to be
changed.
Changes instruction.
(Move cursor to
instruction position first.)
when instruction does not
need to be changed, go
to next step (3) to change
operand.
Changes operand.
(Move cursor to operand
position first.)
Inserts new line.
Deletes line.
Monitors scan time,
current values, and ON/
OFF statuses.
KVHKA Chap 06_1&2.p65 08.3.11, 11:16 AM 201