KEYENCE Visual KV Series - Manual (Page 205)

5.3 Module/Unit Connections
KV
-300
KV-10/80
1
5
Chapter 5 KV-300 Hardware
1-181
5.3.5 Removing the Terminal Block
To remove the terminal block cover of the KV-B16R/KV-B16S and KV-AN6, follow
the procedure below.
1. First, turn the power OFF. Pull open the terminal block cover from the top.
2. The terminal block is secured with a lock bar as shown below.
3. Remove the terminal block by pushing the terminal block lock bar to release the
terminal block.
Note: Only the KV-B16R/KV-B16S and KV-AN6 have a removable terminal block.
Terminal lock bar
Open
Terminal lock bar
Remove terminal block
Push
KVHKA Chap 05.p65 08.3.11, 11:14 AM 181