KEYENCE Visual KV Series - Manual (Page 227)

6.2 Basic Operations
Chapter 6 Handheld Programmer
1-203
1 6
ALL CLEAR [FNC60]
Deletes the entire program currently written in the KV. (The program is replaced by
"NOP"). Before creating a new program, be sure to execute ALL CLEAR.
• Functions only when the PROGRAM mode is in use.
• Even if ALL CLEAR is executed, the data in the data memory is not deleted but
remains stored.
Operation
Writing program
A new program is written on the line being displayed.
Functions when the PROGRAM mode or OFFLINE EDITOR [FNC67] is in use.
Description
• The previous or following line can be successively displayed by scrolling up or
down using
ON
or
OFF
.
• When [ENT/R-SRCH] is pressed after the entry of the instruction/operand, the
next line is automatically displayed.
• [ ➞] is used to move the cursor between the instruction, operand and line No.
positions. The cursor must first be moved to the desired position to enter the
instruction/operand.
• Pressing [DEL] or [INS] allows you to enter the DELETE or the INSERT mode.
Example 1: Entering the basic contact instruction
Entering "LD 0003"
A L L C L E A R
E X E C . O K ? RES
0
ENT
R-SRCH ORB
6
FNC
ENT
R-SRCH
0 0 0 0 0
N O P
Cursor (blinking)
ENT
R-SRCH
C O M P L E T E D
0 0 0 0 0
N O P
0 0 0 0 0
L D 0 0 0 0 0
LD
7
Cursor
(blinking)
L D 0 0 0 0 3
ORL
3
Cursor
(blinking)
N O P
ENT
R-SRCH
Cursor
(blinking)
0 0 0 0 0
0 0 0 0 1
Cursor
(blinking)
Enter LOAD instruction
Cursor automatically moves to operand
position.
Enter "0003".
"LD 0003" has been set.
"LD 0003" has been entered.
KVHKA Chap 06_1&2.p65 08.3.11, 11:16 AM 203