BECKHOFF EtherCAT IP Core for Altera FPGAs v3.0.10 - Manual (Page 44)

IP Core Configuration
III-32 Slave Controller – IP Core for Altera FPGAs
5 IP Core Configuration
Figure 7: EtherCAT IP Core Configuration Interface
Documentation button
Documentation on the MegaWizard, the EtherCAT IP Core and the configuration options
Parameters pane (left)
The configuration options for the EtherCAT IP Core are available in the IP Core parameters pane on
the left side.
Presets pane (right)
Depending on the IP Core functionality that should be implemented and the available resources (Les)
in the FPGA, the internal features can be chosen. Several common feature presets are available.
Based upon these presets, individual functions can be enabled/disabled in the parameter pane.
Message pane (bottom)
In the lower box additional information like warnings and errors are displayed.