QuickLabel Designer Pro - Manual (Page 117)

- 117 -
Note:
All objects are aligned relatively to the first selected object.
Then click appropriate buttons in the Design toolbar to align selected objects to each other. If Align
toolbar is not visible (by default it is located on the very right side of the window), enable the
Design toolbar in Toolbar option in View menu.
You can align objects to:
Left
Right
Horizontal center
Top
Bottom
Vertical center
You can also distribute object evenly, so that spacing between them is equal:
Horizontally
Vertically
Note:
If you hold the <CTRL> key while clicking the buttons, objects are aligned relative to label and not
to the first selected object.
The shortcut <Ctrl> + A opens the Align dialog box with same functionality as the Design toolbar.
Resizing Objects
To resize the object on the label, do the following:
1. Select the object.
The selected object is framed with a rectangle.
2. Click on one of the small rectangles in the corners of the rectangle.
3. Hold the mouse key pressed.
4. Move the position of the cursor on the screen.
The object will resize with the cursor.
Rotating Objects
To rotate the object, do the following:
1. Select the object.
2. Click on the icon in the design toolbar.
The object will be rotated for 90° clockwise.
Note:
If the design toolbar is not visible, select the command Toolbars in the View menu, then click on the
Design.