Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual
Xel xsp-100 shark® integrated access platform
Advertising
Table of contents
Document Outline
- Trademarks:
- Approvals:
- Copyright
- License
- Safety Information and Precautions
- Warranty, Repair Return
- Tech Support
- Ordering Information
- Registration Card
- FAX Registration Card
- Ch-1 Introduction
- Ch-2 Installation Options
- Ch-3 Cable Guide
- How to use this guide
- Model:9SA-1208-M06 Voice Interface Cable
- Model:9SA-1230- X05/X10/X25 T1 Xover Cables
- Model:9SA-1235-M06/M10/M20 T1 or 10/100BaseT (568B) CAT5
- Model:9SA-1235-X6/X10/X20 10/100BaseT Xover cat5 Cables
- Model:9SA-00DC-CBL: -48DC Power Cable
- Model:9PR-1261-F05/F15/F25 V.35 Interface Cable
- Model:9PR-1261-M05/M15/M25 V.35 Interface Cable
- Model:9PR-1261-X00 V.35 Interface Cable
- Ch-4 User Interface Hardware Connections
- Ch-5 Graphical User Interface (GUI/WEB) Configuration Pages
- Configuration introduction
- Logging in
- The Home Page
- System administration
- Digital Cross Connect
- Trunk Processing Configuration Module
- T1 Configuration
- Configure The IP Router Module
- Collecting Configuration Information
- The IP/Router Configuration Menu
- CRAFT PORT Configuration Page
- Router Review Page
- Voice Configuration Pages
- Serial Data Configuration Pages
- Ch-6 Using the Command Line Interface (CLI) Configuration Pages
- The Command Line Interface
- Starting and Ending a CLI Session
- Using the CLI Help Facility
- ROOT Commands
- arp
- clear
- clearstart
- coldstart
- configure
- console
- Exit
- help or ?
- library
- log
- loglevel
- lpbk
- netstat
- peer-address
- ping
- quit
- reset
- setrtc
- shark
- show
- show alarms
- show bridge interfaces
- show bridge tables
- show crash
- show dhcp agent
- show dhcp server leases
- show dhcp server store
- show enet [all]
- show fdl
- show frmr dlci
- show frmr tree
- show frmr pdlci
- show ip arp
- show ip interfaces
- show ip routes
- show ip sockets
- show ipmap
- show log [all]
- show log old [all]
- show memory[all]
- show scon
- show ppp
- show status
- show tdm port
- show tdm tree
- show rtc
- test
- trace
- update
- who
- INTRODUCTION TO THE CONFIGURATOR
- CONFIG Commands
- CONFIGURING THE TIMING MODULE
- CONFIGURING THE VOICE SYSTEM PARAMETERS
- CONFIGURING THE ROUTER MODULE
- System Settings
- Craft Setup
- Time Division Multiplexing (TDM) Set up
- FDL
- IP Settings
- Configuring PPP for the TDM Channels
- SNMP Settings
- Bridging Settings
- Domain Name System Settings
- DHCP Settings
- Network Address Translation (NAT) Pinhole Commands
- Port Renumbering set servers:
- CONFIGURE VOICE MODULE
- CONFIGURE THE T1
- CONFIGURE THE CROSS CONNECT
- CONFIGURE THE TRUNK MODULE
- CONFIGURE SERIAL V.35 MODULE
- Ch-7 Status and Alarms
- Ch-8 Maintenance/Diagnostics/Monitoring
- Ch-9 Hardware Specifications
- SHARK™ IAD Chassis, 9SA-CHAS-000
- Internal Power Module, 9SA-PW00-000
- Internal Power Module, 9SA-PW01-000
- Router Module/CPU, 9SA-RTR0-V 01, 9SB-RTR0-V01
- Cross Connect Card, 9SA-XCON-V01, 9SA-XCON-V02
- T1 Module, 9SA-XC2T-V01
- T1 Module, 9SA-T100-V01, 9SA-T100-V02, 9SB-T100-V01
- FXS/DPO Module, 9SA-FXS0-V01, 9SA-FXS0-V02, 9SB-FXS0-V01
- FXO/DPT Module, 9SA-FXT0-V01
- The External Power Supply, 9SA-PWEX-000
- Serial V.35 Module, 9SA-SV35-000
- The External Power Supply, 9SA-PWEX-002
- Ch-10 Appendixes