Internal power module, 9sa-pw01-000, General description, Hardware specifications – Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual
Page 210: Physical size, Nternal, Ower, Odule, 9sa-pw01-000 -10, Physical size* -10, Igure
Chapter 9- Hardware Specifications
Chapter 9-10 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
Internal Power Module,
9SA-PW01-000
www.xel.com
1-800-544-6831
9SA-PW01-000
XEL
Figure 6:
Internal Power Module
G
ENERAL
DESCRIPTION
The internal Power module provides ring generation and all internal power
requirements for the SHARK™ IAD. An external AC to DC converter, 9SA-
PWEX-002 which provides a triple output of + 5VDC, -24VDC, and –48VDC
must be used with this Power Supply module. All internal voltages are derived
from the triple voltage output of the external power supply. The Power Supply
module is NOT a hot swappable unit. All power must be disconnected before
installing or removing the power module.
H
ARDWARE
S
PECIFICATIONS
Physical size*
Width: 3.12”
Length: 13.12"
Height: 2.57”
Weight: 0.75 lbs
*All measurements include faceplate