Model:9sa-1208-m06 voice interface cable, Description, Length – Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual
Page 35: Pair twists, Function, Model, 9sa-1208-m06 voice interface cable -5, Escription, Ength, Wists
Chapter 3: Cable Guide
SHARK™ IAD User's Guide
XEL P/N & Release: 9SA-USRS-9.0R1.02
Chapter 3-5
M
ODEL
:
9SA-1208-M06 V
OICE
I
NTERFACE
C
ABLE
Description:
9SA-1208-M06 3 C-50(M) connectors to 1 C-50(M) connector
Length:
9SA-1208-M06
6 feet
Pair Twists:
Each cable should have twisted pairs: 1-26, 2-27, 3-28 . . . 23-48, 24-49, 25-50
Function
The 9SA-1208-M06 cable is used to connect three SHARK™ IAD voice modules
to one M66 block or other terminal wiring.
Used with 2 wire FXS/DPO and FXO/DPT Modules.
This cable meets the RJ2GX Universal Service Order Code document
requirements.
Plug 25 pairs
50 pin TELCO male connector
P1
P3
P2
P1-P3
Connect
to the
Voice
modules.
P4 connects to M66
block or other terminal
wiring block.
P4
6 feet
1 foot
Plug 25 pairs
50 pin TELCO male connector
Plug 25 pairs
50 pin TELCO male connector
Plug 25 pairs
50 pin TELCO male connector
Figure 2:
Model 9SA-1208-M06 Series Voice Interface Cable diagram