Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 217)

Chapter 9- Hardware Specifications
SHARK™ IAD User's Guide XEL P/N & Release: 9SA-USRS-9.0R1.02 Chapter 9-17
Cross Connect Card, 9SA-XCON-V01, 9SA-XCON-V02
SYSTEM
ALARM
9SA-XCON-000 
XEL
Figure 13: Cross Connect module faceplate
G
ENERAL
DESCRIPTION
The Cross Connect card performs the routing of channels throughout the system.
It performs add-drop multiplexing of DS0s between the primary T1 interface and
the secondary T1 interfaces, and mapping of various local-side channels (such as
voice and data) into primary and secondary T1 DS0s. It also establishes internal
reference timing. This cross-connect supports two entirely independent data
channels (serial data streams) and one voice channel that can support up to 48
analog voice access lines.
H
ARDWARE
S
PECIFICATIONS
Physical size* Width: 4.25” Length: 12.66" Height: 1.0” Weight: 0.46 lb
*All measurements include faceplate
User Connector
Pinout
There are no user connectors on this module
Power Dissipation 2.0 watts typical
3.0 watts maximum