Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual - Manual (Page 136)

Chapter 6: Using the Command Line Interface (CLI)
Chapter 6-20 XEL P/N & Release 9SA-USRS-9.0R1.02 SHARK™ IAD User’s Guide
entire log (prior to and since the last restart), enter show log old all and scroll
through the complete log.
SHOW MEMORY [ ALL ] Displays memory usage information for your SHARK™ IAD. Adding the
argument ‘all’ displays more detailed information.
SHOW SCON
Displays Serial Connection information
SHOW PPP
[ipcp | lastconnect | lcp | stats] where
ipcp =to display ppp ipcp info only
lastconnect = to display diagnostics from the prior or current connection
lcp =o display ppp lcp info only
stats = to display ppp stats only
show ppp =No argument specified will display all the ppp information
Displays information about open PPP links. You can display a subset of the PPP
statistics by including an optional stats, lcp, ipcp, or lastconnect argument for
the show ppp command.
SHOW STATUS
Displays the current status of a SHARK™ IAD, the device's hardware and
software revision levels, a summary of errors encountered, and the length of
time the SHARK™ IAD has been running since it was last restarted.
SHOW TDM PORT
Displays the tdm port status.
SHOW TDM TREE
Displays the tdm tree.
SHOW RTC
Displays the Real-time Clock.
TEST
test <cat> <type> <mod> <chan> where
<cat> =Test category. Currently, 'voice' is the only option available.
<type> = Test type. Currently, 'monitor' is the only option available.
<mod>= [ VOICE-1 | VOICE-2 | VOICE-3 ]
<chan>= Channel number on voice module (1-8)
Executes maintenance and diagnostic commands. The only command currently
available is the monitoring of the signaling bits of any circuit on the voice cards.
T EST U SAGE
This command displays the syntax of the test command.
TRACE
trace is a debug tool. Use "trace" to toggle routing tracing. The individual trace
commands show the full connection path between the router and the destination.
They display the router IP address, destination IP address, packets sent, time to
live, protocols involved, lookup, send and receive response and port information
of the destination.
Note: Enabling "trace" may severely decrease router performance.
Follow it with:
TRACE IP
to toggle tracing of IP flow
TRACE RIP
to toggle tracing of RIP flow
TRACE ARP
to toggle tracing of ARP flow
TRACE DHCP
followed by
SERVER
to toggle DHCP server trace
AGENT
to toggle DHCP relay-agent trace
NOARP
to toggle DHCP server arp
TRACE DNS
to toggle tracing of DNS transactions
TRACE HTTP
to toggle tracing of HTTP transactions