Capacity, Data connections, Timing – Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual
Page 220: Sources, Alarms, Part history, Capacity -20, Data connections -20, Timing -20, Sources -20
Chapter 9- Hardware Specifications
Chapter 9-20 XEL P/N & Release: 9SA-USRS-9.0R1.02 SHARK™ IAD User's Guide
C
APACITY
Switch matrix
256
Data
Connections
Number of channels used
at nominal rate:
224
Spare channels:
32
T
IMING
Sources
Main T1
2.048 MHz derived from the WAN's 1.544 MHz
Auxiliary T1
2.048 MHz derived from the WAN's 1.544 MHz
Internal stratum 4
1.544 MHz derived from the 2.048 MHz Stratum 4
internal clock
A
LARMS
The System Alarm indicator will illuminate when facilities alarms are present.
The System Alarm indicator does not illuminate for non-facility related alarms,
e.g. equipment alarms.
All alarms can be queried at the system operation level.
Configuring the Cross Connect card to non-operational will disable the System
Alarm indication.
P
ART
H
ISTORY
Part Number
Features
9SA-XCON-V01
Initial release
9SA-XCON-V02
Allows consistent hard loopback of WAN cards. Prior to this
release a loopback plug inserted into the WAN card may
have not worked correctly depending on the length of the
loopback.