Internal power module, 9sa-pw00-000, General description, Hardware specifications – Verilink XEL XSP-100 SHARK IAP (9SA-USRS-9.0R1.02) Product Manual User Manual
Page 207: Physical size, Nternal, Ower, Odule, 9sa-pw00-000 -7, General description -7 hardware specifications -7, Physical size* -7
Chapter 9- Hardware Specifications
SHARK™ IAD User's Guide XEL P/N & Release: 9SA-USRS-9.0R1.02 Chapter 9-7
Internal Power Module,
9SA-PW00-000
-48 VDC
FRAME GND
CIRCUIT GND
www.xel.com
1-800-544-6831
9SA-PW00-000
XEL
Figure 3:
Internal Power Module
G
ENERAL
DESCRIPTION
The internal Power module provides ring generation and all internal power
requirements for the SHARK™ IAD. An external AC to DC converter or
external -48V DC source is necessary to provide power to the module. All
internal voltages are derived from this –48 volt input. The Power supply module
is NOT a hot swappable unit. All power must be disconnected before installing
or removing the power module.
H
ARDWARE
S
PECIFICATIONS
Physical size*
Width: 3.12”
Length: 13.12"
Height: 2.57”
Weight: 0.75 lbs
*All measurements include faceplate