HEIDENHAIN iTNC 530 (340 49x-05) Cycle programming - Manual (Page 7)

HEIDENHAIN iTNC 530 7
TNC Model, Sof
tw
a
re
and F
eat
ur
es
Intended place of operation
The TNC complies with the limits for a Class A device in accordance
with the specifications in EN 55022, and is intended for use primarily
in industrially-zoned areas.
PLANE function: Entry of axis angle User’s Manual
User documentation as a
context-sensitive help system User’s Manual
smarT.NC: Programming of smarT.NC
and machining can be carried out
simultaneously User’s Manual
smarT.NC: Contour pocket on point
pattern smarT.NC Pilot
smarT.NC: Preview of contour
programs in the file manager smarT.NC Pilot
smarT.NC: Positioning strategy for
machining point patterns smarT.NC Pilot
FCL 2 functions Description
3-D line graphics User’s Manual
Virtual tool axis User’s Manual
USB support of block devices (memory
sticks, hard disks, CD-ROM drives) User’s Manual
Filtering of externally created contours User’s Manual
Possibility of assigning different depths
to each subcontour in the contour
formula User’s Manual
DHCP dynamic IP-address
management User’s Manual
Touch-probe cycle for global setting of
touch-probe parameters Page 444
smarT.NC: Graphic support of block
scan smarT.NC Pilot
smarT.NC: Coordinate transformation smarT.NC Pilot
smarT.NC: PLANE function smarT.NC Pilot
FCL 3 functions Description