Yaskawa V7 Drives - Manual (Page 88)

5-36
Continued
D. n115 : Stall Prevention Above Base Speed During Running Factory setting: 0
Range: 0 or 1
Setting Function
0 Disabled (level is based on setting of n094 )
1 Enabled (level at Fmax, n011 , is n094 x 0.4)
E. n116 : Stall Prevention During Run, Accel/Decel Time Select Factory setting: 0
Range: 0 or 1
Setting Function
0 Follows accel/decel #1 ( n019, n020 ) or accel/decel #2
( n021,n022 )
Note: Multi-Function input selectable
1 Follows accel/decel #2 ( n021,n022 ) always
5.23 STALL PREVENTION