RIGOL MSO/DS1000Z Series - Manual (Page 15)

RIGOL
MSO1000Z/DS1000Z User’s Guide XIII
MSO1000Z/DS1000Z Series Overview
MSO1000Z/DS1000Z series is a multifunctional and high-performance digital
oscilloscope designed on the basis of the UltraVision technique developed by RIGOL.
Featuring extremely high memory depth, wide dynamic range, clear display,
excellent waveform capture rate and comprehensive triggering functions, it is a
useful commissioning instrument for various fields such as communication,
aerospace, defense, embedded systems, computers, research and education.
Wherein, the mixed signal digital oscilloscope aimed at the embedded design and
test fields allows users to measure analog and digital signals at the same time.
MSO1000Z/DS1000Z is the one with the most comprehensive functions and the most
outstanding specifications among the 100 MHz bandwidth digital oscilloscopes.
Main features:
 1 GSa/s real-time sample rate of the analog channels; up to 24 Mpts memory
depth (option) and 12 Mpts standard memory depth
 1 GSa/s real-time sample rate of the digital channels
 100 MHz, 70 MHz and 50 MHz analog channel bandwidth
 4 analog channels + 16 digital channels (applicable to mixed signal digital
oscilloscopes)
 Dual-channel 25 MHz signal source (applicable to digital oscilloscopes with
source channels)
 30 000 wfms/s (dots display) waveform capture rate
 Real-time hardware waveform recording and playback functions; up to 60000
frames of waveform can be recorded
 Multi-degree gray scale display
 Low base noise, 1 mV/div to 10 V/div ultra-wide vertical dynamic range
 7.0 inch WVGA (800*480) TFT LCD, with ultra-wide screen, vivid picture, low
power consumption and long service life
 Adjustable waveform brightness
 Auto setting of waveform display (AUTO)
 Up to 15 kinds of trigger functions, including various protocol triggers
 Standard parallel decoding, support multiple serial decoding options
 Auto measurement of 33 waveform parameters (with statistics)
 Fine delayed sweep function
 Built-in FFT function
 Multiple waveform math operation functions
 Pass/fail test function
 Standard interfaces: USB Device, USB Host, LAN, Aux, GPIB (extended via the
USB Host interface)
 Conform to LXI CORE 2011 DEVICE class instrument standards; enable quick,
economic and efficient creation and reconfiguration of test system
 Support remote command control
 Built-in help to facilitate information acquisition
 Support multiple languages and Chinese/English input