RIGOL MSO/DS1000Z Series - Manual (Page 94)

RIGOL Chapter 5 To Trigger the Oscilloscope
5-20 MSO1000Z/DS1000Z User’s Guide
ns to 10 s.
Trigger Mode:
Press Sweep to open the trigger mode list and select auto, normal or single. For the
details, please refer to " Trigger Mode". The corresponding status light of the
current trigger mode turns on.
Trigger Setting:
Press Setting to set the trigger parameter (noise rejection) under this trigger type.
Trigger Level:
When the trigger source is an analog channel, you can use TRIGGER LEVEL to
modify the level. For the details, please refer to the introduction of " Trigger Level".