TA Triumph-Adler DCC 2520 - Manual (Page 104)

Other Features of this Fax
5-2
Automatically Switching Between the Fax and a Telephone (Auto FAX/TEL
Switching)
This reception mode is convenient for using a separately purchased telephone together with this fax
on a single telephone line. If an incoming call is from a fax machine, fax reception will start
automatically. If the call is from a telephone, the fax will ring to let you know that you should answer.
NOTE: Auto FAX/TEL Switching is only possible if a separately purchased telephone is connected
to this fax machine.
Even if you do not answer the telephone, the calling party will incur telephone charges after the
phone rings a predetermined number of times.
Reception flow
Preparation
Refer to Selecting the Automatic
Reception Mode (Receive Mode setting)
on page 7-12, and select Auto Fax/Tel.
SW.
Make sure that Auto RX is displayed on
the basic fax screen. If it is not, press the
reception mode select key and then
press the [Auto RX] key.
1 When a call comes in, the telephone will ring. However,
if ‘0’ is selected for Auto Fax/Tel SW under the Number
of Rings setting, the ringing will not be audible.
NOTE: The telephone will ring only once in the metric
version models. In the inch version models, you can
set the number of times the telephone will ring. (Refer
to Setting the Number of Rings [Auto Fax Reception]
(Number of Rings setting) on page 7-6.)
2 Answering the call...
riginal & assign destination.
. 0% for fax transmission.
Application
Abbrev.
TX
Register
Re-dial
On-hook
setting
Dest.
check
Memory TX
Auto RX
Print Report
Memory usage:
OCT-11-2005 16:00